Magpul PMAG GEN M3 Magazine

MAGPUL PMAG GEN M3 MAGAZINE

PMAG® 30 AR 300 B GEN M3®, 300 BLK

The PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles chambered in 300 Blackout®. Since its inception, 300 BLK shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the key features of 300 BLK is the compatibility with 5.56x45mm parts, but with the magazine, it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a dedicated 300 BLK magazine was a logical step for the PMAG line.

In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 BLK rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 BLK round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B incorporates all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification, and a dust/impact cover.

Blackout is a registered trademark of Advanced Armament Corp.

Made in the USA

PMAG® 20 LR/SR GEN M3®

The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, highly reliable magazine for SR25/M110 pattern rifles. It features true 20-round capacity, a constant-curve body, an anti-tilt follower, and a snap on impact / dust cover.

Our GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding.

Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Its simple, tool-less disassembly makes for for easy cleaning and maintenance.

Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.

Made in the USA.